1 / 1
Customizable Cornhole Scoreboard
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An openscad model and generated stl files I used to add a scoreboard to homemade cornhole boards.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 200
- Wydruki
- 0
- Wyświetlenia
- 1381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (64)Powiązane
Customizable Cornhole Scoreboard
Add a scoreboard to your cornhole / bean bag / whatever you call it boards.
Building
Printed parts:
- 1x each file for each scoreboard (probably 2x total)
- Print a few pieces to test the fit on your slider bar; if too small, scale up in slicer or adjust in openscad file.
- Multiple models combined in each stl; if your slicer supports it should be able to split into individual parts.
- If there's a need for it I can upload each part individually, just didn't want to clutter the post if not needed.
- ends
- I printed in black
- highlight-scores
- I printed in white
- normal-scores
- I printed one set in red and one set in blue
Hardware:
- 2 round metal bars
- As sized I used 2 ¼" aluminum rods 18" long, conveniently allowing both to be cut from one 36" piece
- 4 wood screws
- As sized should be a #8 screw (I believe 4mm would be the metric equivalent). I used a drywall screw, not sure if it was #6 or #8 .