1 / 1
Customizable Cornhole Scoreboard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An openscad model and generated stl files I used to add a scoreboard to homemade cornhole boards.
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 200
- Makes
- 0
- Views
- 1,381
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Customizable Cornhole Scoreboard
Add a scoreboard to your cornhole / bean bag / whatever you call it boards.
Building
Printed parts:
- 1x each file for each scoreboard (probably 2x total)
- Print a few pieces to test the fit on your slider bar; if too small, scale up in slicer or adjust in openscad file.
- Multiple models combined in each stl; if your slicer supports it should be able to split into individual parts.
- If there's a need for it I can upload each part individually, just didn't want to clutter the post if not needed.
- ends
- I printed in black
- highlight-scores
- I printed in white
- normal-scores
- I printed one set in red and one set in blue
Hardware:
- 2 round metal bars
- As sized I used 2 ¼" aluminum rods 18" long, conveniently allowing both to be cut from one 36" piece
- 4 wood screws
- As sized should be a #8 screw (I believe 4mm would be the metric equivalent). I used a drywall screw, not sure if it was #6 or #8 .