Lamp #61 - Japanese Shoji Carry Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Japanese Shoji Carry Lamp
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 808
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
A taller Japanese carry Shoji style lamp/lantern.
Shade measures 155mm height x 110 Width
Lamp with walls, base and top:
270 mm height by 170 mm width
Print 1 piece each of the base, handle, and the shade.
Print 2 each of the Holder, Holder Braces, Cross Braces, and Leg Braces.
Melt 2 x M3 Inserts, into the Holder Braces, 1 into each of them
Melt 2 x M3 Inserts into the Handle.
Melt 2 x M3 Inserts into sides of the base.
Connect the the 2 Leg Braces with the 2 Cross Braces
Attach the handle to the Leg Braces using 2 M3 by 10 mm Screws.
Run the lamp cable wires through the bottom of the base and attach the fassung, socket, and screw it into place in the bases. The socket should easily turn into the socket holder. Insert a bulb, plug it in and test your connections.
Attach the Base to one holder and then attach the 2 Holder Braces to the same Holder. Make sure the m3 inserts are facing the outside, see pictures.
Attach the second holder press the pieces together.
Slide the shade in through the top and test again.
Slide the shade/base assembly between the arms of the handle and match up the 4 holes with the M3 inserts.
attach the base/shade assembly to handle assembly using 4 M3 by 12 or M3 by 14 mm screws..
Done
No supports required.
The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9
The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58
The E14 Bulb used here:
https://www.amazon.de/dp/B0B5MPL9MX
2 x M3 by 10 Screws
4 x M3 by 12 mm or 14 mm screws
https://de.aliexpress.com/item/32443118299.html?
6 x M3 Inserts
https://www.amazon.de/dp/B08BCRZZS3?
The slicer settings for the base, handle, braces and holders:
.20 mm Standard
(All standard settings and speeds, Aligned seam settings)
Filament: Eryone Matte PLA+ Black
The slicer settings for The Shade:
Filament: Sunlu PLA+ White
.20 Standard
Infill % - 100 , Rect
Wall Loops - 6
Top Shell - 3
Bottom Shell - 6
Seam Position- Aligned