1 / 19
Lamp #61 - Japanese Shoji Carry Lamp — image 1
1 / 19

Lamp #61 - Japanese Shoji Carry Lamp

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Japanese Shoji Carry Lamp

Rating
0 / 5
Likes
51
Downloads
85
Makes
0
Views
808
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial

A taller Japanese carry Shoji style lamp/lantern.

Shade measures 155mm height x 110 Width

Lamp with walls, base and top:

270 mm height by 170 mm width

Print 1 piece each of the base, handle, and the shade.

Print 2 each of the Holder, Holder Braces, Cross Braces, and Leg Braces.

Melt 2 x M3 Inserts,   into the Holder Braces, 1 into each of them

Melt 2 x M3 Inserts into the Handle.

Melt 2 x M3 Inserts into sides of the base.

Connect the the 2 Leg Braces with the 2 Cross Braces

Attach the handle to the Leg Braces using 2 M3 by 10 mm Screws.

Run the lamp cable wires through the bottom of the base and attach the fassung, socket, and screw it into place in the bases. The socket should easily turn into the socket holder. Insert a bulb, plug it in and test your connections.

Attach the Base to  one holder and then attach the 2 Holder Braces to the same Holder. Make sure the m3 inserts are facing the outside, see pictures.

Attach the second holder press the pieces together.

Slide the shade in through the top and test again.

Slide the shade/base assembly between the arms of the handle and match up the 4 holes with the M3 inserts.

attach the base/shade assembly to handle assembly using 4 M3 by 12 or M3 by 14 mm screws..

Done

No supports required.

The fassung-lamp socket ( e14-28 mm):
     https://www.amazon.de/dp/B097K4YNL9

The electrical cable and switch:
     https://www.amazon.de/dp/B002DAOX58

The E14 Bulb used here:

       https://www.amazon.de/dp/B0B5MPL9MX

2 x M3 by 10 Screws

4 x M3 by 12 mm or 14 mm screws

    https://de.aliexpress.com/item/32443118299.html?

6 x M3 Inserts

    https://www.amazon.de/dp/B08BCRZZS3?

 

The slicer settings for the base, handle, braces and holders:

.20 mm Standard

(All standard settings and speeds, Aligned seam settings)

Filament:  Eryone Matte PLA+ Black

 

The slicer settings for The Shade:

Filament:   Sunlu PLA+ White

               
.20 Standard
Infill %  - 100 , Rect
Wall Loops - 6
Top Shell - 3
Bottom Shell - 6
 

Seam Position- Aligned

Tags