1 / 6
Hops Tap Handle (3/8"-16 Thread)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First things first: this was inspired by this tap handle and it was created in OnShape before I realized that the…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
First things first: this was inspired by this tap handle and it was created in OnShape before I realized that the other model included the part file...
This model is different because:
- It does not require any support material
- There is just enough threading to allow for stability while tightly fitting to a 3/8" screw
- It requires less material as it is thinner (20% infill gives it more than enough strength)
- The fillets on the top and bottom are of different radii to allow for a different finished look
The current stl is threaded for a 3/8"-16 Tap.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20%
Category: Kitchen & Dining