1 / 6
Hops Tap Handle (3/8"-16 Thread)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
First things first: this was inspired by this tap handle and it was created in OnShape before I realized that the…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 110
- Makes
- 0
- Views
- 271
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
First things first: this was inspired by this tap handle and it was created in OnShape before I realized that the other model included the part file...
This model is different because:
- It does not require any support material
- There is just enough threading to allow for stability while tightly fitting to a 3/8" screw
- It requires less material as it is thinner (20% infill gives it more than enough strength)
- The fillets on the top and bottom are of different radii to allow for a different finished look
The current stl is threaded for a 3/8"-16 Tap.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20%
Category: Kitchen & Dining