Case for BTT SKR Pico and Raspberry Pi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for BTT SKR Pico and Raspberry Pi equipped with fan mount. Easy assembly and completely closed.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This case for BTT SKR Pico allows you to have the control board and the Raspberry Pi in the same case!
It's optimised for a perfect cooling: the mount for a 50mm radial fan provides cooling to both the boards to avoid any overheating.
The holes on the side have been placed in a position that let you remove the cables as easy as possible to let you move them really quickly!
To complete the build the following parts are required:
- 8x M3 threaded inserts (4x5.7)
- 4x 10mm M3 screws
- 4x 5mm M3 screws
- (additional screws for the fan are required too)
This model is really solid even if it requires a low amount of filament to be printed.
Any print settings can be used to achieve the best final result.