1 / 3
JOINT travel/transport CASE // labeled *high* // "print-in-place-model"
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Optimized Version! // bit Longer // bit more inner-width for active tubes
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 280
- Wydruki
- 2
- Wyświetlenia
- 877
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (33)Powiązane
Hi,
I tested a lot available models and got improvement ideas for all of them, by some friends ;D.
The ideas are:
- cooler chilled Design
- more perfect click-effect of the cover for a closing-enjoyment
- long enough to not stress the joint
- more width to get the joint out without getting any stress-levels
print settings:
- 0,15mm layer (0,4mm nozzle)
- 3 perimeters
- 15% infill
- supports and brim can be used as follows

Important: no supports or brim in the "joint-area" :D - (marked red)
Happy chilled printing!