1 / 2
the Ranja Registry - Home Assistant Inventory Tracker
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An inventory tracker for Home Assistant that works via MQTT. STEP files included
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
An inventory tracker for bottles with a flat bottom, like cans. Makes it possible to show an indication in your Home Assistant dashboard.
Requirements
- Running Home Assistant server
- MQTT Broker
BOM - Bill of Materials
- Glue
- Hot glue
- 1x* micro switch
- 1-4x* threaded inserts (You don't need to use every fixture, just enough to hold it tight)
- 1-4x* M3x10mm bolts
- 1X RP Pico W
- Wires
- Models
- 1x Front (either logo or blank)
- 1x End
- 1x* Case
- 1x* Platform
*= amount x amount of slots you want to have
Assembly
- Glue the Cases, Front and End pieces together**
- Glue the Platform pieces together**
- Melt the threaded inserts into the Case pieces
- Hot glue the Pico W in place
- Solder the wires according to the Wiring scheme
- Flash the Pico W with CircuitPython, then add the code.py and lib files
- Screw everything down
- Plop your bottles on the slot.
**= Glue the pieces together on a sheet of parchment paper so you can keep it flat and not glue it to the table as glue won't stick to it.
Wiring
Code
- https://github.com/SanderGeraedts/ranja-registry