1 / 2
the Ranja Registry - Home Assistant Inventory Tracker
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An inventory tracker for Home Assistant that works via MQTT. STEP files included
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 10
- Makes
- 0
- Views
- 211
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
An inventory tracker for bottles with a flat bottom, like cans. Makes it possible to show an indication in your Home Assistant dashboard.

Requirements
- Running Home Assistant server
- MQTT Broker
BOM - Bill of Materials
- Glue
- Hot glue
- 1x* micro switch
- 1-4x* threaded inserts (You don't need to use every fixture, just enough to hold it tight)
- 1-4x* M3x10mm bolts
- 1X RP Pico W
- Wires
- Models
- 1x Front (either logo or blank)
- 1x End
- 1x* Case
- 1x* Platform
*= amount x amount of slots you want to have
Assembly
- Glue the Cases, Front and End pieces together**
- Glue the Platform pieces together**
- Melt the threaded inserts into the Case pieces
- Hot glue the Pico W in place
- Solder the wires according to the Wiring scheme
- Flash the Pico W with CircuitPython, then add the code.py and lib files
- Screw everything down
- Plop your bottles on the slot.
**= Glue the pieces together on a sheet of parchment paper so you can keep it flat and not glue it to the table as glue won't stick to it.
Wiring

Code
- https://github.com/SanderGeraedts/ranja-registry