1 / 5
30L Blue Barrel - Hydroponic Tower base
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixes directly to the lid of a 30L blue barrel reservoir the 3d printed hydroponic towers.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 158
- Wydruki
- 0
- Wyświetlenia
- 434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (26)Powiązane
Fixes directly to the lid of a 30L blue barrel reservoir the 3d printed hydroponic towers.
With 4 perimeters and an increased number of top/bottom layers, this lid will firmly hold 3d printed hydroponic tower modules when attached on a 30L blue barrel lid with 35mm+ M4 screws.
I printed with supports but I think you'd get away without using them.