Harbor Freight Ultimate Sortimo Rail Install Guide Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I loved the design of the Harbor Freight Ultimate Sortimo except I wanted the rails to be flush and pass through.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 767
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I modified the install guides only to allow me to mount the rails flush and pass them through. I modified using a saw and chisel the ones kai created and decided to make my own because it turns out modifying 3d printed parts with a saw and a chisel sometimes breaks the part. you only really need one of each part but I chose to print 2 of each so I could do both sides of a cabinet going down.
I have also made a 2" offset version of the install guide for my next cabinet so I can offset the rails 2" from the back of the cabinet.
I also found the rail company I have been buying from reversed their hole pattern from what the original design. This resulted in many reprints but at least I was able to cobble a modification together in TinkerCad because I have not had time to learn OnShape yet. I will be printing these tomorrow and trying them out. I am pretty confident that they will work though.
Update: I have tested my support design and it does work. I have both types in the pictured rack and I cannot tell the difference.