Harbor Freight Ultimate Sortimo Rail Install Guide Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I loved the design of the Harbor Freight Ultimate Sortimo except I wanted the rails to be flush and pass through.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 60
- Makes
- 0
- Views
- 767
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I modified the install guides only to allow me to mount the rails flush and pass them through. I modified using a saw and chisel the ones kai created and decided to make my own because it turns out modifying 3d printed parts with a saw and a chisel sometimes breaks the part. you only really need one of each part but I chose to print 2 of each so I could do both sides of a cabinet going down.
I have also made a 2" offset version of the install guide for my next cabinet so I can offset the rails 2" from the back of the cabinet.
I also found the rail company I have been buying from reversed their hole pattern from what the original design. This resulted in many reprints but at least I was able to cobble a modification together in TinkerCad because I have not had time to learn OnShape yet. I will be printing these tomorrow and trying them out. I am pretty confident that they will work though.
Update: I have tested my support design and it does work. I have both types in the pictured rack and I cannot tell the difference.