strap keeper / retainer for loose end DIFFERENT SIZES
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
strap keeper for loose ends of your bagpack or tie-down straps in different sizes
- Ocena
- 5 / 5
- Polubienia
- 142
- Pobrania
- 353
- Wydruki
- 3
- Wyświetlenia
- 1461
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a simple strap keeper that can be used as a replacement part for securing the hip belt on backpacks. It ensures that loose, excess strap ends are neatly held in place. I've designed various models for straps ranging from 20 mm to 80 mm, each with an additional 3 mm tolerance. For fine-tuning, the size can be adjusted in the slicer.
(The strap keeper is also useful for other types of straps, such as tie-down straps.)
Enjoy your next hike!
PRINTING:
Supports: no
Layer height: 0.2 mm
Infill: < 50 %
Bed adhesion: I recommend printing it with a brim, because the contect surface is small
Material: PLA