Worx Holder set M5 for 2060 Profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had to organize my Worx drill stuff. So I screwed a 2060 profile on my shelf and made (remixed) some holders.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to organize my Worx drill stuff.
So I screwed a 2060 profile onto my shelf and made a few brackets (replicated).
The end stops are necessary because the charger is only pushed on. So when you remove the battery after charging, the end stops prevent the charger from slipping out of the holder.
I have adapted the models to my needs.
The models are printed on my MK4 with a 0.6mm nozzle in PLA.
I used 3 walls an 50% infill.
Only the battery holder needs supports.
Many thanks to all the original designers for their great models.
PS: Sorry for the chaos in my workshop ... ;-)