1 / 8
Star Wars Deckbuilding Insert to fit "Base-Damage-Trackers" into the Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for "Star Wars: The Deckbuilding Game" that fits the printed Base Damage Trackers into the Box
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
This is an Insert in order to fit the printed Base-Damage-Trackers into the box. Make sure to read the instructions carefully.
General Information
- The Base-Damage-Trackers are not included in this design. See Instructions below about how to find and print them
- The insert does not fit sleeved cards
- The insert does not fit all the damage cubes anymore - but they are needed less anyways, since the base-damage gets tracked with the Base-Damage-Trackers
- It uses about 200g of filament
Printing Instructions
- Print two of the little boxes (one for resources and one for damage cubes)
- The StarWars-Logo does only appear if you paint it in the slicer
- No supports needed
- Use infill as you like - I used 10% honeycomb and it worked great with PETG
Instructions: Base-Damage-Trackers (not included)
- Download Base-Damage-Trackers from here
- IMPORTANT: Scale each Base-Damage-Tracker down uniformly to 200mm length, so it fits into the box. It should result in 200 x 15.81 x 83.72 mm in size.
- Print Base-Damage-Trackers