1 / 8
Star Wars Deckbuilding Insert to fit "Base-Damage-Trackers" into the Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Insert for "Star Wars: The Deckbuilding Game" that fits the printed Base Damage Trackers into the Box
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 27
- Makes
- 0
- Views
- 529
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an Insert in order to fit the printed Base-Damage-Trackers into the box. Make sure to read the instructions carefully.
General Information
- The Base-Damage-Trackers are not included in this design. See Instructions below about how to find and print them
- The insert does not fit sleeved cards
- The insert does not fit all the damage cubes anymore - but they are needed less anyways, since the base-damage gets tracked with the Base-Damage-Trackers
- It uses about 200g of filament
Printing Instructions
- Print two of the little boxes (one for resources and one for damage cubes)
- The StarWars-Logo does only appear if you paint it in the slicer
- No supports needed
- Use infill as you like - I used 10% honeycomb and it worked great with PETG
Instructions: Base-Damage-Trackers (not included)
- Download Base-Damage-Trackers from here
- IMPORTANT: Scale each Base-Damage-Tracker down uniformly to 200mm length, so it fits into the box. It should result in 200 x 15.81 x 83.72 mm in size.
- Print Base-Damage-Trackers