1 / 1
Gearknob M10x1.5 (Honda fitment) — zdjęcie 1

Gearknob M10x1.5 (Honda fitment)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MY first design Shift knob with M10x1.5 thread used in Hondas

Ocena
5 / 5
Polubienia
5
Pobrania
78
Wydruki
2
Wyświetlenia
398
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

he first shift knob I designed for use in my Toyota MR2 roadster. This has been adapted to sit lower and for fitment with Older Hondas using a M10x1.5 thread

This design was used as a tester for a carbon fibre variant now being used in my wife's Honda Jazz GD3 (Yes a little rusty run-around has Carbon Fibre)

I have printed this with 100% infill with at least 4 perimeters in PETG. I had to chase the thread with a M10x1.5 tap to clean it up. For lighter weight use 50% infill. No supoprts required for PETG.

Tagi