QuadLock Phone Stand Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A versatile phone stand for quadlock sockets
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 195
- Wydruki
- 6
- Wyświetlenia
- 557
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
Gerhard's original model is a great design, but was not very sturdy when paired with an iPhone (14 Pro).
ethanthompson's remix provides great stability, but lacked the angle options offered by the original (imo).
This remix tries to mix the best features of both these models.
Printing
I've printed this in PETG with a 0.25 nozzle, and it fits and clicks in place like a glove.
Should also work with a “standard” 0.4 nozzle but YMMV.
Model file
The source file can be found at OnShape at this link.
The model has some parametrized features, namely you can adjust the length of the leg pairs to your liking.
The angle isn't parametrized, but you can easily change it if you dig into the model a bit. I intend to make more features driven by variables in the future.
The STL file provided here has 30mm and 50mm for the short and long legs respectively.
