Ikea Lack Rack Mount (45mm unit height)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snuggly push a full width rack with a unit height of 45mm underneath an Ikea Lack table.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I recommend PETG and a high infill percentage.
Don't forget to clone and mirror both parts before printing.
Additional Requirements:
8x4mm wood screws
Sidenote:
If you have kids around I would recommend to round off the sharp edges. I had this in use for 8ish months and everytime kids came over they “found” the sharp edges…
My designs are released under a public domain license: You can do whatever you want with it. I put as much care and attention to detail into it as if it was a commercial product. If my design solved a problem for you, I'd like to invite you to donate me a quarter of a filament spool. These little gestures go a long way and are quite motivating. Thank you!
