Tesla Model 3/Y Rear Tein EnduraPro Shock Dustboot Retainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU ring to allow the OEM rear shock dust boot to be retained when replacing the OEM rear shocks with Tein EnduraPro
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
When installing some Tein EnduraPro Plus dampers on my Model Y Performance, I found that the OEM rear shock dust boot retainers didn't fit onto the Tein damper. This ring is to be printed in TPU (90-95A shore hardness works well) so it can stretch over the larger cap on the top of the shock and then the OEM dust boot clips onto it.
Updated 7/21/25
I made it slightly longer for more grip on the shock body as well as shrinking the ID .25mm and increasing the outer flange diameter .5mm. I had see a couple cars I had installed these on later and they had moved around. Hopefully these changes will stop that.