Tesla Model 3/Y Rear Tein EnduraPro Shock Dustboot Retainer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU ring to allow the OEM rear shock dust boot to be retained when replacing the OEM rear shocks with Tein EnduraPro
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 44
- Makes
- 0
- Views
- 384
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
When installing some Tein EnduraPro Plus dampers on my Model Y Performance, I found that the OEM rear shock dust boot retainers didn't fit onto the Tein damper. This ring is to be printed in TPU (90-95A shore hardness works well) so it can stretch over the larger cap on the top of the shock and then the OEM dust boot clips onto it.
Updated 7/21/25
I made it slightly longer for more grip on the shock body as well as shrinking the ID .25mm and increasing the outer flange diameter .5mm. I had see a couple cars I had installed these on later and they had moved around. Hopefully these changes will stop that.