1 / 7
LCD to frame gap filler for MK3.5, MK3.9, MK4 & MK4S* (4 separate models, *see note below)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fills the space between screen and frame to prevent losing items there. Snap fits onto the bolt head. Print in PETG.
- Ocena
- 4,667 / 5
- Polubienia
- 16
- Pobrania
- 104
- Wydruki
- 4
- Wyświetlenia
- 556
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 4) (Komentarze: 9)Remiksy (0)Kolekcje (30)Powiązane
If slicing yourself, orient with the text face on the bottom
Prints without supports
Print in PETG
Sliced at 0.15mm layer height using Prusa 0.15mm structural default settings for PETG at 245°C.
Gcode provided is for MK3.5
* warning - one person reported it did not fit their MK4S but another person has found it fitted well