Kindle Oasis AMPS/RAM mount clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holding bracket for mounting Kindle Oasis on a RAM/AMPS mounting system
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Custom fit holder/clamp for a Kindle Oasis 3rd gen with its cover/case.
Has mounting holes for both universal AMPS style mounting balls and RAM mount 3-hole mounts. Should be compatible with most 1" (B-size) balls.
I have it clamped to my bed's headboard, so I can read comfortably at night, with help of a remote page turner.
Note that clamping force is dependent on what springs and screws you use. If its too weak, switching to longer springs and/or shorter screws can improve it. It can generally hold a Kindle in place through most motions and vibrations, but it probably isn't suitable for stunt drivers or offroading.
I printed in Nylon PA6-GF and PTFE, but you can probably print in any material, as it's not terribly dependent on flexibility, and has enough intrinsic strength to hold up what is a relatively lightweight device.
Assembly is required, you will need:
- Screws:
- 2x M2.5x10 screws
- 4x M3x30 screws
- 2x M5x10 screws
- Heat set inserts:
- 2x M2.5x2.5x3.5 heat set inserts
- 4x M3x4x5 heat set inserts
- 2x M5x6x7 heat set inserts
- Springs:
- 4x compression springs, I used 5.5x41x0.40mm ones
- 1 RAM “B” round plate with ball, or similar AMPS mount
- 1x Kindle Oasis 3rd gen