Heat set Insert for Rugged Multipart Pinecil/TS100 Case, less resistance
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for holding the CNC Kitchen Heatset tool used on Pinecil and TS100 irons, with increased clearances.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 137
- Wydruki
- 2
- Wyświetlenia
- 914
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
To make it easier to insert and take out the tips for heat set inserts, I increased the clearance and width of the slot openings.
I also modified the two soldering iron tip slots, making the sides thinner and more flexible. I don't want these to move around, so clearance is unchanged.
The clearances are parametric, but the slot opening width was adjusted by playing around with fillets until they had roughly the desired dimensions.
By the way, this is what I measured the tip diameters to be:
- M8: 9.45mm
- M6: 7.95mm
- M5: 6.45mm
- M4: 6.45mm
- M3: 6.45mm
- M2.X: 6.45mm
Apologies if I confused terms clearance and tolerance.