IKEA JETSTRÖM Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two piece ceiling mount for IKEA JETSTRÖM (L2206) LED lights. Includes parametric f3d.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 815
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a two piece mount for the L2206 JETSTRÖM IKEA light fixture.
Drilling 2-4 holes is extremely annoying, with this mount a single central screw is used to affix a center hub with passthroughs for cables, to which the main bracket then slides and rotates onto.
The main bracket has the exact hole pattern and bolts onto the JETSTRÖM frame, it is then just a matter of sliding it onto the center hub and rotating 90 degrees.
I used 4x M4 threaded inserts and 4x M4x8 bolts to join the main bracket to the fixture, the fixture mounting holes are sized for 4mm hardware, so you can use a nut and bolt system if you want.
This can be printed out of PLA as the light does not get more than slightly warm and there is a lot of air gap between every component.
The “UP” emboss should face towards you and at the edge of the fixture that has the rotating hook.
I have included a Fusion file, the whole thing is parametric for the most part, so you should be able to change most things you'd care about (mount hole pattern, hole diameters, etc..)
The 3mf file has the two objects included, I have only tried printing them separately so I do not know if it is possible to print everything in place.