Stand for 6S Arrma differential
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand for the differentials of Arrma 6S vehicles while doing maintenance.
- Ocena
- 4,9 / 5
- Polubienia
- 54
- Pobrania
- 465
- Wydruki
- 10
- Wyświetlenia
- 1641
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With my kids playing around the workshop, the risk of an impact on the workbench is very high. This simple stand prevents the differential of 6S Arrma vehicle from tipping over while doing maintenance, when you fill it and let it rest for the air bubbles to rise up. You can also place an assembled diff with either cup downward and let it rest for a few hours to check if the seals are good before putting it back in the car.
Print with wide base on the bed, no support. I used 3 walls and 20% infill, but it's really not critical.