Sprite PETG (PETG+) Cura Profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my Ender 3 Max (and technically S1 Pro) Cura profile
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 248
- Wydruki
- 0
- Wyświetlenia
- 1239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
EDIT 12/4/24:
It was brought to my attention that I did not upload the profile properly. I've corrected this. I've also abandoned cura, this is merely a QOL update to make sure the profile is accessible for others. Apologies for the delay.
Original:
This is the cura profile that I run for my ender 3 max and for my ender 3 S1 Pro. The only difference between the ender 3 max and s1 pro is the print/travel speed/acceleration.
I cannot stress this enough. This profile was intended to be used with Klipper. You still need to perform your standard calibrations for rotational distance, pressure advance, and even temps (for your filament if you plan to change to a new filament)