Retroid Pocket 4 / Pro Reversible Grip Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slim fitting case that can be used on both sides - one to grip and one to protect the screen and device.
- Ocena
- 5 / 5
- Polubienia
- 100
- Pobrania
- 1212
- Wydruki
- 8
- Wyświetlenia
- 5326
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
The Retroid Pocket 4 / Pro is a retro handheld emulation game console that runs on Android. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective case.
There are two models of this case. This is a slim case. Both can be used as a grip or reversed for protection.
- Standard - A standard grip design
- Ergo - A grip design that has a bit of an ergonomic touch to it with indentations on the grip
I used PLA+, 0.2mm height, 15% infill, and 3 perimeter. I also tried variable layer lines on the curved areas and they came out great. You may notice the top clip will need a long support going up to it since it is an angled bend; I used organic supports for these. I've also provided a model that has the clip split from the body for a cleaner print. You will need to use an adhesive like CA glue for this.
If you feel that the case is too tight or loose to your liking, I suggest scaling in all directions in a tiny amount (100.1 or 99.9, etc).
Check out my profile if you also have a Powkiddy RGB30 & Anbernic RG405M & RG35XX H for similar cases. Happy gaming!
UPDATE 6/21/24: Made case clipping a little tighter.
UPDATE 8/24/24: Made a version with 5mm added to depth of grip.