1 / 3
Skimmer Pod and Camera Gimbal - Europe parts — zdjęcie 1
1 / 3

Skimmer Pod and Camera Gimbal - Europe parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parts requiring imperial parts replaced with metric parts.

Ocena
5 / 5
Polubienia
24
Pobrania
92
Wydruki
1
Wyświetlenia
808
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Gimbal from Martin_au is really nice model, but few parts are made with imperial parts, thus really hard or expensive to obtain in Europe. I replaced the thrust bearing with more common one in Europe - 51100 (with dimensions 10x24x9) and bolt holding the base plate with the bottom with M10 bolt.

Changed parts:

  • base plate for two 51100 thrust bearings (10x24x9) and for M10 nut slotted inside the base plate
  • base plate plug to accommodate M10 opening slot
  • top plate and cover for 51100 thrust bearing

The M10 bolt length choose by your needs, depending on the attachment you need.

 

Edit: I added “heavy_” variant, with more material in baseplate between bearing and bolt - original started to bend in those places, no matter print settings, perimeters, infill etc. With this in mind, I updated the top-plate to get more material as well, together with more flushed head of the bolt, so it does not interfere with arm body. Bolt used to hold top-plate and base-plate together is M8x45.