Skimmer Pod and Camera Gimbal - Europe parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts requiring imperial parts replaced with metric parts.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 93
- Makes
- 1
- Views
- 814
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Gimbal from Martin_au is really nice model, but few parts are made with imperial parts, thus really hard or expensive to obtain in Europe. I replaced the thrust bearing with more common one in Europe - 51100 (with dimensions 10x24x9) and bolt holding the base plate with the bottom with M10 bolt.
Changed parts:
- base plate for two 51100 thrust bearings (10x24x9) and for M10 nut slotted inside the base plate
- base plate plug to accommodate M10 opening slot
- top plate and cover for 51100 thrust bearing
The M10 bolt length choose by your needs, depending on the attachment you need.
Edit: I added “heavy_” variant, with more material in baseplate between bearing and bolt - original started to bend in those places, no matter print settings, perimeters, infill etc. With this in mind, I updated the top-plate to get more material as well, together with more flushed head of the bolt, so it does not interfere with arm body. Bolt used to hold top-plate and base-plate together is M8x45.