1 / 1
Insert Ring for Bear Gen 6 Trucks — zdjęcie 1

Insert Ring for Bear Gen 6 Trucks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Reduces the slop in Bear Gen 6 Trucks

Ocena
0 / 5
Polubienia
1
Pobrania
39
Wydruki
0
Wyświetlenia
223
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Replaces the top of broken plug bushings (remove the broken plug top and insert this ring) or simply when you want to reduce the slop in your Bear's when using non-plug bushings.

Important: This must be printed in TPU filament (hardness 93A/95A) to allow for movement of the kingpin in the bushing seat. Insert rings made out of hard materials lika PLA will break.

Tagi