Threaded and height-adjustable turntable feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable risers for turntable feet permit leveling of turntable on uneven surfaces.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 663
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The surface my turntable sits upon isn’t quite level and the turntable original feet are not adjustable for height. So i designed an easy solution!
These coarse threaded two part risers allow independent adjustment of each corner. I printed in white matte to match my turntable.
Top part has a small recess for a felt disc and to contain the turntable feet. Bottom part has a smooth bottom and is ready for felt or rubber or a material of your choosing.
The coarse thread makes for an easy print without supports. I printed these with a 0.6mm nozzle at a 0.2 layer height and 0.66 line width. I printed infill fairly dense as i wanted to minimize flex but you can use your own judgement here.
Hope you enjoy and be sure to let us know of any makes or remixes.