Threaded and height-adjustable turntable feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable risers for turntable feet permit leveling of turntable on uneven surfaces.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 132
- Makes
- 0
- Views
- 663
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The surface my turntable sits upon isn’t quite level and the turntable original feet are not adjustable for height. So i designed an easy solution!
These coarse threaded two part risers allow independent adjustment of each corner. I printed in white matte to match my turntable.
Top part has a small recess for a felt disc and to contain the turntable feet. Bottom part has a smooth bottom and is ready for felt or rubber or a material of your choosing.
The coarse thread makes for an easy print without supports. I printed these with a 0.6mm nozzle at a 0.2 layer height and 0.66 line width. I printed infill fairly dense as i wanted to minimize flex but you can use your own judgement here.
Hope you enjoy and be sure to let us know of any makes or remixes.