Butterfly - Wiggly colorful blobs for the garden or flowerpot)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This butterflys mounted on a welding wire are little but colorful blobs in your garden. The wingspan is about 90mm.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 1266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This butterflys mounted on a welding wire are little but colorful blobs in your garden. The wingspan is about 90mm. Assembly might be a bit flimsy, but it could also be a me and my rough fingers ;-)
If you like this thing, you might want to print those, too:
Butterfly with a living hinge - (Glue to a thing / wall): https://www.thingiverse.com/thing:3668684
Windmill (Garden / Toy): https://www.thingiverse.com/thing:3664786
Windmill - 8 wings (Garden / Toy): https://www.thingiverse.com/thing:3669693
Print instructions
Category: Outdoor & Garden Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Resolution: 0.2mm for the wings, 0.1mm for the body
Infill: doesn't matter
Filament: Das Filament PETG Metallic Blue, Maisgelb (Metallic Blue, Corn yellow)
Notes:
I've added 2 versions of the butterfly:
- The parts starting with MMU are designed (but not tested) for multi color / multi material printing.
- The other parts are design for single extrusion printers (like the one I'm using). I've used this service https://blog.prusaprinters.org/color-print/ to insert a filament change command at layer height 0.6mm into a gcode file rendered by Slic3r / PrusaSlicer. Might work with other slicers, too.
- The Butterfly_Welding_Wire_Mount-Body(Bottom)-Body1.stl part is used for both versions.
Post-Printing
Material
- hairdryer to form the butterfly
- glue (CA glue for indoors, more resistance glue like 2 part epoxy for outdoor)
Stable but flexible wire. 2mm diameter, 1000mm length. I used something like this: https://www.ebay.de/itm/WSG2-Stahl-Schweisstabe-WIG-Schweisdraht-W3Si1-SG2/173578616058?hash=item286a177cfa:m:m6cm3L5rTizx0-SWE9izHIQ
PreparationThe butterfly is printed flat on the print bed. You can use a hairdryer to slightly heat up the print and bend it to your desire. In just a couple of seconds a boring flat little piece of plastic transforms in something cute and more realistic.
Assembly
- Put the bottom part of the body onto the wire
- Apply some glue to at the top of the bottom body
- Add the wings to the wire
- Level both parts that they align with the top of the wire
- Apply some glue to the bottom of the top body
- Place and align the top part onto the top of the wings