1 / 15
Butterfly - Wiggly colorful blobs for the garden or flowerpot) — image 1
1 / 15

Butterfly - Wiggly colorful blobs for the garden or flowerpot)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This butterflys mounted on a welding wire are little but colorful blobs in your garden. The wingspan is about 90mm.

Rating
0 / 5
Likes
7
Downloads
66
Makes
0
Views
1,268
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This butterflys mounted on a welding wire are little but colorful blobs in your garden. The wingspan is about 90mm. Assembly might be a bit flimsy, but it could also be a me and my rough fingers ;-)

If you like this thing, you might want to print those, too:

Butterfly with a living hinge - (Glue to a thing / wall): https://www.thingiverse.com/thing:3668684

Windmill (Garden / Toy): https://www.thingiverse.com/thing:3664786

Windmill - 8 wings (Garden / Toy): https://www.thingiverse.com/thing:3669693

Print instructions

Category: Outdoor & Garden Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Resolution: 0.2mm for the wings, 0.1mm for the body

Infill: doesn't matter

Filament: Das Filament PETG Metallic Blue, Maisgelb (Metallic Blue, Corn yellow)
Notes:

I've added 2 versions of the butterfly:

  • The parts starting with MMU are designed (but not tested) for multi color / multi material printing.
  • The other parts are design for single extrusion printers (like the one I'm using). I've used this service https://blog.prusaprinters.org/color-print/ to insert a filament change command at layer height 0.6mm into a gcode file rendered by Slic3r / PrusaSlicer. Might work with other slicers, too.
  • The Butterfly_Welding_Wire_Mount-Body(Bottom)-Body1.stl part is used for both versions.

    Post-Printing

Material

  • hairdryer to form the butterfly
  • glue (CA glue for indoors, more resistance glue like 2 part epoxy for outdoor)

Assembly

  • Put the bottom part of the body onto the wire
  • Apply some glue to at the top of the bottom body
  • Add the wings to the wire
  • Level both parts that they align with the top of the wire
  • Apply some glue to the bottom of the top body
  • Place and align the top part onto the top of the wings

Tags