Joseph Joseph Folio Chopping Board Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A door/wall mount for the Joseph Joseph Folio range of chopping boards
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
This is a set of clips to mount a set of Joseph Joseph chopping boards. I mounted mine on the inside of a cupboard door, but they could also be mounted to any wall.
You will need 6 small screws (ensure they are shorter than the thickness of your cupboard door!). I printed two of each bracket in PLA. I recommend printing with a skirt/brim, because there is not a huge amount of bed contact. I guess you could print a third bottom one if you want it to be extra-secure, but I find two bottom brackets plenty.
First screw in the top brackets - ensuring they are level with each other. Then slide the chopping board case up into the top brackets to mark the positions for the bottom holes.
I needed to put a couple of washers behind the bottom brackets because the panel inside my cupboard door is recessed slightly, but if your surface is flat then it will mount flush.