Joseph Joseph Folio Chopping Board Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A door/wall mount for the Joseph Joseph Folio range of chopping boards
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
This is a set of clips to mount a set of Joseph Joseph chopping boards. I mounted mine on the inside of a cupboard door, but they could also be mounted to any wall.
You will need 6 small screws (ensure they are shorter than the thickness of your cupboard door!). I printed two of each bracket in PLA. I recommend printing with a skirt/brim, because there is not a huge amount of bed contact. I guess you could print a third bottom one if you want it to be extra-secure, but I find two bottom brackets plenty.
First screw in the top brackets - ensuring they are level with each other. Then slide the chopping board case up into the top brackets to mark the positions for the bottom holes.
I needed to put a couple of washers behind the bottom brackets because the panel inside my cupboard door is recessed slightly, but if your surface is flat then it will mount flush.