Counting matching models…
I loved @BrookTrouts knife cover, and my wife was trying to get rid of the giant waste of counter space that is known as the "knife holder blob". So, I measured a few times, and came up with these. I recommend you measure your knife, then…
Sheath for an apparently fairly common kitchen knife. Another easy and quick print. Best results I had so far was with the following orientation (+ adding a bit of brim), using the default 0.35 Layer Height profile:
wood chopping axe If you like it, give it a follow, like and download it, it helps me a lot. Thanks for the support!
Sheath for an apparently fairly common kitchen knife. Another easy and quick print. Best results I had so far was with the following orientation (+ adding a bit of brim), using the default 0.35 Layer Height profile:
4x slot chopping board drier stand you will need screws: silver coated countersunk flat head self tapping 10x M3 x 15mm recommended filament material PETG
You can stick This chopping board holder in the cabinet door and store your chopping board. It can hold two chopping boards with a depth of 18mm. Also, it would be best if you had 5 mm clearance inside your door and the cabinet shelf.
Modular Cutting Board Stand System Keep your kitchen boards safe and easily accessible. Expandable stands hold any amount of boards 8 sizes available, for 30mm, 28mm, 26mm, 20mm, 18mm, 16mm and 10mm thick boards Frugal but sturdy design…
You ll need to print 3 links and two sides. If links are too loose, add a drop of superglue. Standard print settings (0.4mm nozzle, 0.2mm height etc.), I'd add fuzzy skin as well - up to end user though.
Tofu press designed to use ikea 365 chopping board for food contact surface. Carving out a slot on the base chopping board allows water to flow off the board into a sink etc.. Fits two ~400g blocks of tofu. Two versions of the screw are…
This device protects your fingers during the chopping process in the kitchen, helping to speed up the task with confidence, it help training your speed with no risk. After fitting the middle finger in the ring, you protect also the other…
Use this mount to firmly attach the IKEA LÄMPLIG (003.098.29) chopping board to a wall or side of a cabinet. Use six wooden screws. The holders keep the board 10mm away from the wall so you can put back the board even if it's still wet,…
Design Concept This coin is designed to mimic the dimensions of a 2€ coin, allowing for easy use in shopping cart mechanisms that require coin insertion to unlock. For a more personalized design you can put your name on it. Use The…
Overview A simple chopping board rack to hold your boards up off the bench and provide some separation between them. Features Holds boards up off the benchtop Has 4 bays First bay has a slight lip to stop boards sliding off. Second and…
wood chopping axe If you like it, give it a follow, like and download it, it helps me a lot. Thanks for the support!
Sheath for an apparently fairly common kitchen knife. Another easy and quick print. Best results I had so far was with the following orientation (+ adding a bit of brim), using the default 0.35 Layer Height profile:
A box to hold 65mm 1/3, 1/6, 1/9 Gastronorm trays to the side of a chopping board to aid with mise en place or waste disposal. For each set of L and R you will need either, 3 screw connectors are needed along with 6 M5x10mm screws to hold…
remax fm http://www.thingiverse.com/thing:106281 not test yet. Category: 3D Printer Accessories
How cool is this chopping board? The "Splash Chopping Board" is cleverly designed to make it stable against the edge of the kitchen counter using the drip as an edge. If necessary the "drips" can easily be removed, making a completely…
This rack holds up to 6 discs of the additional food processor attachment of Kennwood Cooking Chef XL. Hence my cutting discs just were thrown in a box, I wanted to keep them more organized and better accessible. This is a pretty big…
Keychain with Chopsticksholder, Phoneholder and Chopping cart token. Design yin and yang. Use color swap to print the coaster in two colors. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15
I designed this chopping-board rack in as my first project using Plasticity and went a little crazy with the boolean operations. I wanted to save filament but keep the strength in the design so it could hold larger chopping boards without…
Do you want your Ikea LÄMPLIG chopping board to slide along the kitchen countertop without hitting the faucet? This set of spacers might help! Available in 20, 30 and 40mm To be used with 3.5x25mm screws (remember to drill a 2mm hole…
A small chopping board for a play kitchen for children. Recommended to print with 100% infill.
I use this double hook to dry my felt pots in the foil greenhouse. Ich verwende diesen Doppelhacken für die Trocknung meiner Filztöpfe im Foliengewächshaus.
I needed a way to hold a few of those plastic chopping boards. This holds them vertically (so they'll dry if they're a little damp from washing). Holds 5 boards up to 10mm thick. Recommended Print Setup: PLA 0.6mm nozzle 4 walls 10%…
Now a days many chopping boards come without holes. Due to this issue we cannot hang the boards on the wall mounts. But with this 3D printed model, you can hang your boards on the wall. It is very easy to attach this part on the wooden…
4x slot chopping board drier stand you will need screws: silver coated countersunk flat head self tapping 10x M3 x 15mm recommended filament material PETG
On my quest to maximalize my work space and put everything on walls this time it is holder for my chopping boards by JosephJoseph just the boards wall mount is all my design. I think it would fit normal wooden boards as well but depends…
Simple drainage recipient for chopping boards. In the attached picture there are 2 pieces glued together
I love old horror movies and dioramas, so I made this! The robot has channels in it for LEDs so you can light it up. See how I modelled it here:
A small holder for chopping boards an bags. I remade a design I made a few years ago with my lastest 3d design skills. I use this one to hang bags on it to dry. You like our work? Feel free to buy us a coffee! ❤
As inspired by the original shape shared by FabLab Shinagawa, this model incorporates user requirements from participants and makers in Singapore. Hence “SINGAgawa”. Developed by SalvageGarden Makers at the Punggol Regional Library…
You can stick This chopping board holder in the cabinet door and store your chopping board. It can hold two chopping boards with a depth of 18mm. Also, it would be best if you had 5 mm clearance inside your door and the cabinet shelf.
This is a set of clips to mount a set of Joseph Joseph chopping boards. I mounted mine on the inside of a cupboard door, but they could also be mounted to any wall. You will need 6 small screws (ensure they are shorter than the thickness…
This model needs to be made out of a material that is heat resistant up to 100 degrees Celsius and food safe. filments such as PP peek and nylon can potenially be used but make sure you do your research before 3d printing this as some…
