1 / 2
Gastronorm Mounts for Chopping Board 1/3, 1/6, 1/9 — image 1
1 / 2

Gastronorm Mounts for Chopping Board 1/3, 1/6, 1/9

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A box to hold Gastronorm trays next to a chopping board to aid with mise en place or waste disposal.

Rating
0 / 5
Likes
6
Downloads
12
Makes
0
Views
198
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

A box to hold 65mm 1/3, 1/6, 1/9 Gastronorm trays to the side of a chopping board to aid with mise en place or waste disposal.

For each set of L and R you will need either,

  1. 3 screw connectors are needed along with 6 M5x10mm screws to hold them together.

  2. 3 glue connectors and some glue.

The no split version does not need connectors, but will need a print bed of 335x285mm minimum.

To have on one side of a chopping board only, you will need two of the board supports

There are small indents on the bottom and chopping board shelf/supports for 10mm rubber foot pads.

My chopping board is around 57mm deep so this is sized for that. For a shorter board, you will need to adjust the board shelf to be higher to keep the ability to wipe off into the trays. Alternatively, you could re-size up or down for a different depth tray.

Tags