V0.2 xy joint pins with toothed idlers (8.5mm height)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No need for any heat set inserts or spacers, uses 4 3x20mm pins. This variant supports toothed idlers 8.5mm in height.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 589
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Single piece xy joint for voron 0 providing extra rigidity and precision, this one allows installing toothed idlers.
Disable thick bridges if you can to make holes rounder. Due to the reduced bridging capability with it disabled, an extra version with support in the middle is provided. Click "split to objects" before slicing to slice support correctly.
Tested to cause a noticeable reduction in 2mm belt VFA on 3d prints.
New Update 2025-04-28: Added a version without the indent on the left side, as it is not needed without using original designer's custom toolhead.