Gridfinity/Clickfinity edge baseplates with connectors (gridfinity compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These baseplates connect to the clickfinity baseplates with connectors. They provide a way to create a flushed edge.
- Ocena
- 4 / 5
- Polubienia
- 78
- Pobrania
- 264
- Wydruki
- 1
- Wyświetlenia
- 3719
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The clickfinity baseplates by James Boone are amazing https://www.printables.com/model/719455-gridfinity-clickfinity-baseplate-w-connectors, but they are not designed to be flushed with a vertical surface.
(You might also want to consider clickbase plates https://www.printables.com/model/982173-clickbase-a-no-magnet-latching-gridfinity-baseplat/files since they are a good alternative to clickfinity).
These section baseplates allow you to create a perimeter of width 2 for a total of size of at least 6x6. you need an original clickfinity baseplate (see https://www.printables.com/model/719455-gridfinity-clickfinity-baseplate-w-connectors) to fill the center (all edges should have female connectors).
For sizes smaller than 6x6, simply use a baseplate of the desired size.
How to use:
- Print 4 corners
- Print the sides according to the desired final size. Any length larger than 2 can be created with a combination of the 2,3 and 5 sized ones.
At this point you should have the perimeter. Now print the necessary clickfinity baseplates with connectors to fill the center.
A big thank you to James Boone for making available the Fusion360 file.