Gridfinity/Clickfinity edge baseplates with connectors (gridfinity compatible)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These baseplates connect to the clickfinity baseplates with connectors. They provide a way to create a flushed edge.
- Rating
- 4 / 5
- Likes
- 78
- Downloads
- 266
- Makes
- 1
- Views
- 3,727
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The clickfinity baseplates by James Boone are amazing https://www.printables.com/model/719455-gridfinity-clickfinity-baseplate-w-connectors, but they are not designed to be flushed with a vertical surface.
(You might also want to consider clickbase plates https://www.printables.com/model/982173-clickbase-a-no-magnet-latching-gridfinity-baseplat/files since they are a good alternative to clickfinity).
These section baseplates allow you to create a perimeter of width 2 for a total of size of at least 6x6. you need an original clickfinity baseplate (see https://www.printables.com/model/719455-gridfinity-clickfinity-baseplate-w-connectors) to fill the center (all edges should have female connectors).
For sizes smaller than 6x6, simply use a baseplate of the desired size.
How to use:
- Print 4 corners
- Print the sides according to the desired final size. Any length larger than 2 can be created with a combination of the 2,3 and 5 sized ones.
At this point you should have the perimeter. Now print the necessary clickfinity baseplates with connectors to fill the center.
A big thank you to James Boone for making available the Fusion360 file.