Soccer Ball Coin/Poker Chip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is effectively my soccer ball earring/keychain design without the hole. I had a request for this. So, here it is!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 201
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
Contains two soccer balls. The parts are oriented face down so that the front of them pick up the texture of the build plate. I've found that doing this with a textured build plate creates a nice finish on the surface and help hides the lines created when the filament is laid down. The soccer balls are roughly 1.5" in diameter.
The file is split into objects for each section of the ball, so selecting filament to match your desired colors is super easy. They are split into the following parts:
Body
Black
White
Number Inside
Number Outside
I've also included the .step files for each, individual soccer ball.
Print/Filament settings:
0.16mm Layer Height
Arachne Wall Generator
3 wall loops
4 top/bottom layers
10% infill with Cubic pattern (This is only a 12 layer print at 0.16mm height. With 4 top and bottom layers only 4 layers are actually infill.)