Logitech Harmony Elite Charging Base Holder Accessory for Seatcraft Home Theater Seating
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With home theater seating I quickly realized there is not a good place to keep the harmony remote charging base. Now I…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
With home theater seating I quickly realized there is not a good place to keep the harmony remote charging base. Now I do! If you have theater seating that has an accessory port, this will likely do the trick. I am assuming the multiple vendors have the same size port hole (1/2" or 12.7mm).
I created the part in two pieces to be glued together and a hole to hold the dowel rod tightly without any glue. It even has a port cut out for the micro usb port. I made the opening big enough to support a right angle plug.
The pictures are of my prototype and I was careless when gluing the two parts together. I will be printing it again in black or will try some wood filament and stain it for a nice warm look. Yet wanted to host the files in case someone else could use the design.
If you print one, please post a make of it, I would like to see how it works in your theater room!
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Ultimate
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
25%
Filament: ANY PLA
ANY
Notes:
For printing I added additional wall lines (6 in total) for the bottom part to ensure the dowel insertion would not crack the PLA.
Category: Organization