Logitech Harmony Elite Charging Base Holder Accessory for Seatcraft Home Theater Seating
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With home theater seating I quickly realized there is not a good place to keep the harmony remote charging base. Now I…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
With home theater seating I quickly realized there is not a good place to keep the harmony remote charging base. Now I do! If you have theater seating that has an accessory port, this will likely do the trick. I am assuming the multiple vendors have the same size port hole (1/2" or 12.7mm).
I created the part in two pieces to be glued together and a hole to hold the dowel rod tightly without any glue. It even has a port cut out for the micro usb port. I made the opening big enough to support a right angle plug.
The pictures are of my prototype and I was careless when gluing the two parts together. I will be printing it again in black or will try some wood filament and stain it for a nice warm look. Yet wanted to host the files in case someone else could use the design.
If you print one, please post a make of it, I would like to see how it works in your theater room!
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Ultimate
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
25%
Filament: ANY PLA
ANY
Notes:
For printing I added additional wall lines (6 in total) for the bottom part to ensure the dowel insertion would not crack the PLA.
Category: Organization