Retro Arcade Clock - Rpi2DMD - P5 Frame Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a really cool project that was created by some really talented folks over on the neo-arcadia forums and as…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a really cool project that was created by some really talented folks over on the neo-arcadia forums and as soon as I saw it I HAD to build one. The original project called for an acrylic cover plate, which I decided wasn't necessary for my needs, so I remixed the original frame kit to be more minimal in nature and quicker to print.
If you wish to build one, please go to the following website and read the instructions (using google translate if you don't speak French) and find out how to access the RasberryPi Image and additional animations. http://www.neo-arcadia.com/forum/viewtopic.php?f=14&t=66819
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Ultimate
Rafts:
No
Supports:
No
Resolution:
0.4mm
Infill:
20%
Filament: ANY PLA
ANY Post-Printing
Hardware to assemble to framekit
1) Superglue to assemble frame together
2) 28x M3 screws for both the frame covers and attaching the LED P5 panels to the frame
- 2x-4x M2.5 screws for mounting the RaspberryPi
The rest of the electronics are listed in a spectacular guide hosted on the neo-arcadia forum link above. You will have the exact parts needed to make this a reality in your home too!!
Category: Electronics