*Old version* Elegoo Neptune 4 CW2/G2 Voron StealthBurner with Beacon/Cartographer Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting plate for StealthBurner for Elegoo Neptune 4
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 2226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
- * NEW VERSION - https://www.printables.com/model/1064760-neptune-4-and-4-pro-stealthburner-with-beaconcarto *
Mounting plate for StealthBurner for Elegoo Neptune 4 with mounting holes for beacon3d or cartographer probe or original inductive probe.
I currently use it for my Stealthburner with cartographer and volcano hotend, so my Stealthburner a little bit longer.
If you want to use with volcano and original inductive probe you probably need to move mount hole a little bit lower.
Big thank you to MakerMylo for model and video guide!
Models that I used:
Beacon/Cartographer mount - check here
StealthBurner V6 Volcano/CHC Pro - check here
For wiring toolhead I used BTT EBB SB2209 (RP2040) with U2C V2.1 and connected probe with CanBus
It is possible with stock elegoo toolhead board, but canbus is much cleaner solution
If you have any issue with tolerances or need to change mouting holes location feel free to make any changes with provided step file or write in a comments