1 / 5
Red Giant - Unnoficial Printables Badge (Star of Design Level 5) — zdjęcie 1
1 / 5

Red Giant - Unnoficial Printables Badge (Star of Design Level 5)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Congratulations on reaching 5k downloads on your models! This (unnoficial) Printables badge will look rad on your wall.

Ocena
5 / 5
Polubienia
14
Pobrania
19
Wydruki
1
Wyświetlenia
210
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Share Alike

I recently reached the mark of 5k downloads on my models, and I realized there is no official model for the Star of Design badges. So I decided to design my own badge =)

According to Printables, the Red Giant (Star of Design Level 5) badge is achieved by only 0.3 % of active users. It is definitely a reason to be proud! Celebrate by hanging one of these in your wall :)

Print Advice

The model was designed to be printed in single-extrusion multi color, with 2 filament changes. Prints in less than 1 hour on the MK4.

The pre-sliced (.3mf) file has the color changes and all settings I used to print mine:

  • 0.15mm (speed)
  • Infill 15%, no brim or supports
  • Printed in PLA

These are the filaments I used to print mine:

  1. eSun ePLA Silk - Silver
  2. eSun ePLA Matte - Orange
  3. eSun ePLA Matte - Black

Tagi