Red Giant - Unnoficial Printables Badge (Star of Design Level 5)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Congratulations on reaching 5k downloads on your models! This (unnoficial) Printables badge will look rad on your wall.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 19
- Makes
- 1
- Views
- 210
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
I recently reached the mark of 5k downloads on my models, and I realized there is no official model for the Star of Design badges. So I decided to design my own badge =)
According to Printables, the Red Giant (Star of Design Level 5) badge is achieved by only 0.3 % of active users. It is definitely a reason to be proud! Celebrate by hanging one of these in your wall :)
Print Advice
The model was designed to be printed in single-extrusion multi color, with 2 filament changes. Prints in less than 1 hour on the MK4.
The pre-sliced (.3mf) file has the color changes and all settings I used to print mine:
- 0.15mm (speed)
- Infill 15%, no brim or supports
- Printed in PLA
These are the filaments I used to print mine: